Fifth Wheel Download the app

IRP apportioned plates: how the fees get split

When an interstate truck needs IRP apportioned plates, how fees split by miles in each state, what your base state does, the records to keep, and trip permits.

An apportioned plate is one plate and one cab card, issued by your home state, that lets your truck run in the states and Canadian provinces that belong to the International Registration Plan (IRP). Instead of buying full registration in each one, you pay each a share of its registration fee, based on how many miles your truck ran there. Your home state, called the base jurisdiction, collects the whole bill and passes each share along.

When you need apportioned plates

Under the IRP Plan, a truck is an "apportionable vehicle" if it's a power unit used, or meant to be used, in two or more member jurisdictions to haul property (or people for hire), and it:

  • Has two axles and a gross vehicle weight or registered gross vehicle weight over 26,000 pounds, or
  • Has three or more axles, regardless of weight, or
  • Is used in a combination weighing over 26,000 pounds

A three-axle tractor running interstate qualifies on its axles alone. Trucks at or under 26,000 pounds can register under IRP if the owner wants to, but don't have to. Recreational vehicles, vehicles with restricted plates and government vehicles are excluded.

IRP registers the power unit. Trailers are handled separately under your state's rules. Apportioned trucks are meant to run interstate. Texas, for example, requires a registrant to operate all apportioned vehicles interstate.

Your base jurisdiction

You apply in one member jurisdiction, your base. To pick a state as your base, the Texas DMV's IRP packet lists the Plan's three conditions:

  • You have an established place of business there
  • Your fleet runs miles there
  • Your fleet records are kept there or can be made available

Each state decides what proof it takes. Texas accepts things like a Texas driver license, federal tax returns filed from a Texas address, utility bills in your name, or a vehicle titled there, and all of them have to point to the same physical address. For most owner-operators, the base is the state where you live and keep your records.

How the fees are apportioned

For each jurisdiction, the math is the same:

full-year fee for that jurisdiction × (your miles there ÷ your total miles) = what you pay that jurisdiction

Total miles means all of them. The Plan counts every mile the fleet ran, loaded, empty, deadhead and bobtail, both across state lines and within one state. The Texas packet adds personal miles to the list.

The miles come from a reporting period, not the year you're registering for. The reporting period is 12 months, July 1 to June 30, and it ends before your registration year starts. For a registration year that begins in January 2027, the reporting period is July 1, 2025 through June 30, 2026. Check your base state's renewal instructions for the exact period.

New accounts with no miles yet are charged using average distances instead of actual ones.

The plate fee doesn't cover fuel tax (that's IFTA), oversize or overweight permits, operating authority, or registration in places that aren't IRP members.

Worked example (illustrative)

The fees in this table are made up to show the math. They are not any state's real fee. Each jurisdiction sets its own schedule, and IRP posts them on its jurisdiction fee schedules page.

Say your truck ran 100,000 miles in the reporting period, in four states:

Jurisdiction Miles Share of total Full-year fee (made up) Apportioned fee
State A (base) 45,000 45% $1,200 $540
State B 20,000 20% $1,000 $200
State C 20,000 20% $1,350 $270
State D 15,000 15% $900 $135
Total 100,000 100% $4,450 $1,145

Buying full registration in all four would cost $4,450. Apportioned, you pay $1,145, plus whatever plate and admin fees your base state charges.

Look at State C. It has the highest fee, so its 20 percent costs more than State B's 20 percent. Move 10,000 miles from State D to State C and your total goes up, even though you drove the same distance. Where you run matters, not just how far.

Mileage records

An IRP audit checks your reported miles against your trip records, so the records have to hold up. The Texas packet describes the basic record, an individual vehicle distance record (IVDR). Trip sheets and logs can count if they show:

  • Trip start and end dates
  • Origin and destination, city and state
  • Odometer or hubodometer readings at the start and end
  • Route of travel
  • Total trip miles
  • Miles in each state or province
  • Unit number or VIN

Those trip records get summed by month, quarter and year. Texas tells registrants to keep the records for three reporting periods plus the current one, four in all. Texas also says IRP requires it to audit 3 percent of the fleets that renew each year.

These are mostly the same miles your IFTA return needs. Keep one set of state-line miles and use it for both, and the two filings will match.

Renewal

The registration year is 12 months, and your base state sets the month. At renewal you report miles by jurisdiction for the reporting period and pay the new apportioned fees. Texas, for example, asks for:

  • Proof the heavy vehicle use tax is paid, a stamped Form 2290 Schedule 1, for trucks at 55,000 pounds or more
  • Proof of liability insurance
  • Your USDOT number, and the USDOT number of the carrier responsible for safety if that's someone else
  • A copy of your lease, if you're leased onto another carrier

Federal law requires proof the heavy vehicle use tax is paid before a truck at 55,000 pounds or more can be registered. For a truck on the road in July the 2290 is due August 31, so if your plates renew after September, have the new Schedule 1 in hand before you start the renewal.

Trip permits: the alternative

A trip permit is a permit from one jurisdiction in place of apportioned or full registration. Each state sets its own price and how long the permit lasts, so check the state's motor vehicle or permit office before the trip.

Trip permits make sense for a truck that rarely leaves its home state. If you cross state lines every week, buying a permit for each state on each trip adds cost and stops, and apportioned plates are the simpler route. Fuel tax trip permits are a separate thing if you don't have IFTA.

This is general information, not legal or tax advice. Check the official source before you file.

Fifth Wheel puts your IRP plate renewal on its Dates screen with a reminder, and you can set an expiry reminder for the registration 7 to 90 days ahead. The state-by-state miles it keeps for your IFTA worksheet are estimated from your route and fuel stops, and you confirm them. They're the same miles your renewal asks for.

Try it

Your state miles do double duty. Run them through the IFTA calculator each quarter. Four quarters, July through June, add up to the miles by state your plate renewal asks for.